Search Results (17.2K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Greetings, I would like to upgrade my Aurora R8 GPU to https://ca.msi.com/Graphics-Card/GeForce-RTX-4070-Ti-SUPER-16G-VENTUS-2X-OC/Specification Dimensions L 242 x W 125 x H 51 mm My concerns are the card's width of 125mm and power connector adapter. I want to ensure that there is enough room for
Question
•
Alienware Desktops
Community Accepted Solution
I was thinking of adding a geforce gtx 1650 4gb oc , Intel core i7-4790k and 32gbs of ram to the computer, my question is if i would need to change the power supply. I also want people to correct me if that upgrade wouldnt be possible
Question
•
Optiplex Desktops
Community Accepted Solution
I want to get the quickest CPU for running mathematical modelling and algorithms on my T5600. The PC runs single programs, so doesn't have to contend with multiple programs running at the same time. It currently has the original Xeon E5-2620 2.00GHz. Any advice would be very welcome, thanks.
Question
•
Precision Fixed Workstations
Community Accepted Solution
I was using the computer without problems and briefly left the room.When I came back the screen was blank so I assumed it had goen into stand by model. But clicking the mouse or key board didn't help.In fact the light on the tower was steady, ie it wasn't in stand by mode as this is indicated by the
Question
•
Inspiron Desktops
Community Accepted Solution
I have looked all over the net, need to know which MB to use in the upgrade, I am finding two models but only picks of this one, 0HK8K and it has an 8 pin power connector, no picks of the YGWFV one found. I have the L300EPS-00 352NR power supply in my 7080 I hope is the right one though it has 6 pin
Question
•
Optiplex Desktops
Community Accepted Solution
I have a 15 C Core temperature difference between Command Center and HWinfo - Anybody know why that might be. Idle at Command Center - 62 Idle at HWinfo 47 It varies but it's always about 15C different. My computer is cool to the touch on top. When it's running correctly without throttling, I alwa
Question
•
Alienware Desktops
Community Accepted Solution
<Always add the specific system model in the thread title. DELL-Admin> Hardware Scan Result (Manual) - Network Card - Warning - February 17, 2024 9:20:59 AM - Network Card - Warning I get a network card warning for the Killer E3100G 2.5 GB Ethernet Controller in the man
Question
•
Alienware Desktops
Community Accepted Solution
Hi all, I need help , i have PRECISION T7960 config : 8x 128GB 4x4TB SSD CPU Intel Xeon W9-3495X PSU 2200W 4x NVIDIA RTX 6000 ADA Problem is when is 4 GPU inside I don't have picture in any DisplayPort i add cable ,but when i add just two GPU I have picture. Has anyone had these problems, if so
Question
•
Precision Fixed Workstations
Community Accepted Solution
Command Setting / Thermal Settings. My speed is set at Default. Balanced Tab CPU Fan - 32 percent Top Fan - 18 percent Performance Tab Default CPU Fan 35 percent Top Fan 15 percent That doesn't seem like a performance enhancement. There's no difference when I click on it, but there i
Question
•
Alienware Desktops
Community Accepted Solution
I have an Optiplex 7080 that is setup with design software. I would like to upgrade the graphics card to better produce 3D renderings. I figured I would need a more powerful PSU than the stock 260 Watt. It looks like there is a Dell 5K7J8 500W Delta available. My question is about powering the GPU.
Question
•
Optiplex Desktops
Community Accepted Solution
I have an Optiplex GX520 that I need to know if the 9 Pin male D-sub Socket Connector Rs232 is any good or working proper. This is the socket close to where the monitor connects. Is there a way to test this?? Many, many thanks, in advance, for any suggestions!
Question
•
Optiplex Desktops
Community Accepted Solution
I have been having issues running the Dell Support Assist program so i tried uninstalling and reinstalling but now it wont even go through the install process all the way. It started by giving a generic error when i would try the hardware scan part. I checked the event logs and found these errors ev
Question
•
Precision Fixed Workstations
Community Accepted Solution
Presently, an NVIDIA GeForce GTX 1660 Ti card is installed. Can I install an NVIDIA GeForce RTX 4090? Would I need to upgrade the power supply?
Question
•
XPS Desktops
Community Accepted Solution
I have a Dell XPS 8950 (i7-12700, 32GB DDR5, 1TB SSD, 2TB HDD, GeForce RTX 3080 10GB, 750W PSU), purchased 7/19/2023. Sometime in the last few months I began having issues with excessive fan speed/noise correlating with even the smallest increase in processing demand, eg copying a 1 GB mp4 video fro
Question
•
XPS Desktops
Community Accepted Solution
I have a Dell OptiPlex 9010 that is about 11 years old, and whenever I do something heavy on it, it goes extremely loud. Broken fan module? My sister's AIO is fine, Thanks!!
Question
•
Optiplex Desktops
Community Accepted Solution
I have a Dell Optiplex 9020 small form factor model with an I7-4790 and I have gotten a new motherboard (ASUS z87 pro lga 1150), PSU, and an ATX case. Am I able to put the cpu and cooler and ram into this new build and have it work?
Question
•
Optiplex Desktops
Community Accepted Solution
Is the Dell Inspiron 3910 better suited for dual monitors or would it be able to work with an ultrawide monitor? I have some interest in doing a 32 inch monitor upgrade from my current 24 inch monitor. From my research, there are claims the 3910 can work with an ultrawide, but I want to get some com
Question
•
Inspiron Desktops
Community Accepted Solution
I have an XPS 8910 running Windows 10, Version 22H2. My desktop has the optional DVD/CD-ROM drive, that is what is showing up in the Device Manager. After hunting on the Dell site I was able to pull up the system configuration, as shown below. 429-ABBB : BDRE Drive (Reads and Writes t o Blu-Ray dis
Question
•
XPS Desktops
Community Accepted Solution
Is Alienware command center version 6 compatible with Alienware R13, this does not show on drivers and downloads, nor alienware update program but shows for my Dell gaming mouse & keyboard
Question
•
Alienware Desktops
Community Accepted Solution
i have a windows 11 Aurora r10 ryzen edition. I have downloaded and installed both of these: Alienware Command Center 5.x | Driver Details | Dell US Alienware Command Center Application - Full Installer | Driver Details | Dell US restarted my pc and the alienware command center isnt there? I have
Question
•
Alienware Desktops